PT-700C

• Environmentally friendly cleaning chemical.
• Powerful general purpose dispersing agent.
• Dispersant & Cleaner (Neutralised Phosphonates/Polymeric Dispersants.
•  is scientifically formulated using a synergistic blend of neutralised phosphonates and polymeric dispersants that will safely remove corrosion products and silt from closed systems.
• Can be used in either chilled or hot water loops with no risk of excessive corrosion during the cleaning process.
• Can safely be used with types of metals that will be encountered in these systems. In addition, this product will not adversely affect any type of rubber or elastomer that may be present.

    PS-800C

• Powerful passivation chemical.
• Added after chemical cleaning processes for maximum protection.

    A-2044C

• is based on  citric acid  for use at ambient temperature.
• It is highly effective for removing atmospheric rusting from systems and is especially suitable for heating and chilled water systems.
• is scientifically formulated using an inhibited blend of citric acid and wetting agents that will readily remove iron and copper oxides in heat exchangers and boilers.
• Being an organic acid, is a mild cleaner and can be used on most metals without concern of excessive corrosion.
• Suitable for all metals including Copper, Aluminum, Stainless steel, Cast iron…ETC.

    COIL CLEANER

• Is an acid De-scalant for the removal of hardness deposits.
• Can be used to dissolve lime-scale (calcium carbonate) deposits, and is an ideal for the treatment for boilers, calorifiers and heat exchangers.
• Suitable for all metals including Copper, Aluminum, Stainless steel, Cast iron…ETC
• May be used  in plants manufactured from steel, aluminum, copper, and stainless steel.

    A-2055C

• Chemical cleaning and De-scaling for condenser and evaporators.
• Can be used to dissolve lime-scale (calcium carbonate) deposits, and is an ideal for the treatment for boilers, calorifiers and heat exchangers.
• Suitable for all metals including Copper, Aluminum, Stainless steel, Cast iron…ETC.
• Is an acid de-scalant for the removal of hardness deposits.
• May be used at temperature up to 60 ºC in plants manufactured from steel, aluminum, copper, and stainless steel.
• For steel and stainless steel plants, a maximum temperature of 82 ºC may be employed for dissolving iron oxide.

    A-2033C

• Heavy Duty Cleaner & Detergent Alkaline based – Powder.
• Removes oil, grease, carbon, rust, scale and paint.
• High alkaline powder concentrate effective for a range of surface films.
• Lifts deposits and disperses them into the solution preventing re-soiling Process stops as soon as the base material is clean.

    PC-8811

• Is sequestrate based on the sodium salt of E.D.T.A. and has been developed to assist in the removal of acid insoluble sulphates of calcium, barium and strontium, as well as calcium fluoride.
• Is also effective in removing iron oxide/hydroxide and calcium carbonate,though citric acid and hydrochloric acid are preferred for these scalants.
• Can also be used in combination with other.
• Products to remove organic debris and microbial slimes.
• Should always be used as recommended by the membrane manufacturer with respect to temperature and pH, as compatibility with all membrane types should not be assumed.

    PC-4411

• Is membrane cleaner specifically designed to remove iron fouling. It also has affectivity against calcium carbonate scaling.
• Can be enhanced by the inclusion of PC8811 in thecleaning solution although some minor pH correction may be necessary.
• Should always be used as recommended by the membrane manufacturer orequipment supplier, in respect to cleaning pH and temperature.